Brentwood, New Hampshire, United States

Winder Operator

Apply Now

Job ID 53326

PRINCIPAL DUTIES AND RESPONSIBILITIES:

Plant and Environmental Safety

  • Lives the Owens Corning Safety Stand and meets all safety requirements. Safety is a condition of employment.
  • Take personal ownership to work safely and hold other team members to the same high standards of safety
  • Notify supervisor immediately of any accident, near miss or on- the -job injury when it occurs no matter how insignificant it may seem.
  • Participates in the safety, quality, autonomous maintenance, TPM and housekeeping programs as established within the plant; including but not limited to Focused Improvement Events, Safety Committee, Training, etc.
  • Performs job tasks to reduce environmental impact and adheres to the environmental regulations and recycling procedures for waste disposal.
  • Complies with all plant rules and safety regulations.
  • Performs cleanup duties at workstations and/or equipment/machinery.
  • Communicates safety concerns and/or equipment problems/abnormalities to appropriate personnel, maintaining strong communication with the appropriate line section operators to ensure immediate action is taken for product out of spec.
  • Inspect vehicles before use and throughout shift, keeping all equipment clean and operational.

    TPM
  • Participates in plant TPM initiatives - completing activities associated with TPM tasks (adheres to CILT standard, 5S).
  • Continues to use TPM methodology to gain a better understanding of the equipment.
  • Identifies and participates proactively in learning opportunities and develops expertise in those areas.
  • Utilizes Focus Improvement tools to problem solve.
  • Works to achieve zero injuries, zero defects and zero losses.
  • During PM days, uses time effectively to bring equipment to optimal condition for zero losses.
  • Maintain DM and Step Boards.

Quality

  • Perform winder, bander, EDL, and conveyor quality checks and documentation at specified intervals.
  • Maintain control panel – adjust speed, delays, and other timers if needed.
  • Interface with plant employees to provide quality control information.
  • Monitor and report unusual or suspect material issues not within specifications.
  • Communicate with all coater end operators concerning shift production
  • Communicate with all back-end operators concerning quality problems
  • Understand and react to upset conditions.
  • Evaluate all finished product for proper weight.

Productivity

  • Have a basic understanding of product process.
  • Operate both Winders, box makers, Palletizers and EDL.
  • Operate stretch/shrink wrappers, wall of flame for all pallets.
  • Operate banding equipment.
  • Follow IVC inventory processes; print and apply labels
  • Weigh and report pallet weights.
  • Operate powered industrial vehicles (including forklifts, sweepers).
  • Load and stack rewraps.
  • Accurately report the amount of scrap and seconds for tracking.
  • Adjust guide plates and speed for different products.
  • Cover winder end employee outages (to cover vacation, holiday, call-offs, etc.) 
  • Relieve crew members from duties for breaks.
  • Visibly verify completion and submission of all winder operator paperwork (LPA, FAI, Dimension, Pallet Count Sheet).
  • Manage seconds, scrap, and trash.
  • Monitor equipment.
  • Listen for alarms and responds appropriately to the various alarm signals.
  • Assist in repair of mat breaks.
  • Assist in all lace-up, product change procedures.
  • Perform preventive maintenance (PM) on down days.
  • Assist the shift mechanic on machine outages.

    Other
  • Demonstrate the ability to effectively communicate.
  • Support the training and development of colleagues.
  • Demonstrates flexibility to changing priorities as business needs dictate.
  • Identifies and participates proactively in learning opportunities, and develops expertise in those areas.
  • Follows standard operating procedures and processes.
  • Can and is willing to make decisions. Knows the chain of command to get support.
  • Regular Attendance on site and the ability to rotate varying shifts.
  • All other duties as assigned or needed.

SKILLS AND ABILITIES

The employee should hold the following skills and abilities:

  • Demonstrated desire to impact safety
  • Must be able to work independently or in a team atmosphere with minimal direct supervision
  • Demonstrated mechanical aptitude and the ability to troubleshoot
  • High attention to detail
  • Demonstrated ability to multi-task
  • Basic mathematics skills
  • Able to effectively communicate (read, write, speak, understand) English

COMPUTER AND SOFTWARE COMPENTENCIES

The employee must be able to:

  • Work with a computer to perform basic data entry
  • Demonstrate basic computer skills such as Microsoft Outlook, IVC, SCADA and SAP.

    EDUCATION AND/OR EXPERIENCE
  • High School Diploma or GED Equivalent required.
  • Manufacturing or process related experience preferred.

ESSENTIAL PHYSICAL REQUIREMENTS/WORK ENVIRONMENT

  • Must remain drug free
  • Exposure to dust/dirt/fumes/fiberglass
  • Ability to work in wet environments: including head and feet
  • Industrial manufacturing environment with extreme temperature variation
  • Exposure to sounds or noise levels that maybe uncomfortable (hearing protection is provided)
  • Ability to wear applicable PPE for up to 12 hours
  • Ability to distinguish colors and shading
  • Ability to become certified to operate a forklift (when applicable)
  • Prolonged sitting, standing, or walking for 8 – 12 hour shifts
  • Bending and twisting; repetitive movements
  • Able to do repetitive hand, arm, leg movements for up to 12 hours
  • Must be able to squat, bend at the waist and knees freely
  • Be able to climb stairs, use full upper body movement for process; stand up to 12 hours with breaks
  • Ability to work from heights
  • Lift, push and pull 40lbs.repetitively
  • Handle, control, feed, or feel objects, tools or product
  • Must be able to work flexible rotating shift schedules – mandatory overtime as required

About Owens Corning  

Owens Corning is a global leader in insulation, roofing, and fiberglass composite materials. Its insulation products conserve energy and improve acoustics, fire resistance, and air quality in the spaces where people live, work, and play. Its roofing products and systems enhance curb appeal and protect homes and commercial buildings alike. Its fiberglass composites make thousands of products lighter, stronger, and more durable. Owens Corning provides innovative products and solutions that deliver a material difference to its customers and, ultimately, make the world a better place. The business is global in scope, with operations in 33 countries. It is also human in scale, with approximately 20,000 employees cultivating local and longstanding relationships with customers. Based in Toledo, Ohio, USA, the company posted 2018 sales of $7.1 billion. Founded in 1938, it has been a Fortune 500® company for 64 consecutive years. For more information, please visit www.owenscorning.com.

A career at Owens Corning offers the ability to enhance your expertise and achieve your personal and professional aspirations. Through it all, we’ll empower you with an environment that encourages open communication and big ideas, competitive pay for your performance, comprehensive benefits, and more opportunities to make your impact.

Owens Corning is an equal opportunity employer.

Please note:Applications must be filled out completely—incomplete applications will not be considered. Resumes are welcome, but are not a substitute for completing the application.

Apply Now

Sign up for Job Alerts

Be the first to know of new job opportunities:

Sign up here to get the latest job openings to your inbox. All fields are required.

InstructionsAdd category and/or location and click "add". Repeat for additional categories and locations.

  • Manufacturing (MNF), Brentwood, New Hampshire, United StatesRemove

By clicking on "Submit" you agree to receive email job alerts from Owens Corning based upon your preferences. Your personal information will be collected and handled in accordance with Owens Corning Privacy Policy